The 2K Coating can be applied as a protective layer in wheel arches and on the bottom of your car.
This is a high-gloss transparent protective layer with a very high resistance to chemicals and weather influences.
Maximum wear and scratch resistance.
Without adequate ventilation, formation of explosive mixtures possible.
Instructions for use
Make the surface to be treated clean, dry and grease-free.
Mask off the surrounding parts.
Shake the 2K Coating for at least 2 minutes before use.
Remove the red knob from the lid and turn the can upside down.
Then place the red button on the pin at the bottom of the spray can.
First place the spray can on the lid (spray head down) and then on a firm, flat surface.
Then press the red button firmly with the palm of your hand until it stops moving.
Shake the spray can again for two minutes so that both components (lacquer and hardener) can mix and the hardening process starts.
The product is ready to use.
Start by spraying a test piece.
Frequently Asked Questions
At Stipt we sometimes get questions about our products. That is why we have collected the frequently asked questions for you.
How many bottles of 2K Coating do you recommend?
We recommend using between 6 and 7 bottles of 2K Coating to properly protect your base.
Can the 2K Coating also be applied to parts that become hot?
No, we strongly advise against this.
Je kunt niet meer toevoegen aan vergelijken.
Call us now!
Do you have any questions about one of our used cars or services? Feel free to call us